12″ Floor-Mounted Barrier

A bolted steel industrial guard rail that protects machinery, walkways, in-plant offices, personnel and inventory from forklift damage. Four-way posts are punched on all sides to build any barrier shape, and the system is powder coated safety yellow for maximum visibility.

• Post: 4-3/4″ × 4-3/4″ × 3/16″-thick, 42″ or 18″ high
• Footplate: 10″ × 10″ × 1/2″-thick with (4) 7/8″-dia. anchor holes
• Rail: 12″ high × 1/8″-thick, double-ribbed; 2′–10′ on post centers
• Impact rating: 12,000 lbs. at 4 mph

Heavy structural-steel angle rail that bolts flat to the floor to keep forklifts and AGVs on line down aisles and guide them safely into dock approaches, past walls, and along equipment runs. All-welded gussets and radiused entry curves deflect wheel contact and shield rack ends and structural legs from over-steer. Surface-mounted on regular anchor centers with no concrete work · powder-coated safety yellow.

• Rail: 5″-tall structural steel angle (also 3″×4″ / 4″×4″)
• Material: 5/16″-thick steel · ~8.4 lb/ft
• Standard lengths: 9.5 ft and 10 ft sections, coupled for continuous runs
• Install: Floor-anchored, holes on ~24″ centers; entry guide curves

The lightest tier of the drop-in guardrail range, rated by the manufacturer at 5,000 lbs at 5 mph. Built from 14-gauge steel on 4″ × 4″ posts with 8″ × 8″ × 1/2″ base plates, it is sized for electric pallet trucks, powered stackers, manual jacks and push carts rather than counterbalance forklifts. Rails drop into welded post sleeves and lift out again, so a damaged section is swapped without loose hardware.

• Impact rating: 5,000 lbs at 5 mph (manufacturer-stated)
• Rail: 14-gauge ribbed steel, 4 ft–10 ft in 1 ft increments
• Post: 4″ × 4″, 42″ high
• Base plate: 8″ × 8″ × 1/2″