Rack Safety Products
Talk to a specialist(951) 395-0280
Standard
Click to enlarge
Pallet Rack Protection

HDPE Post Upright Rack Protector

A molded high-density-polyethylene guard that snaps onto the upright, for bays where a steel guard is more than the traffic warrants. The color runs through the plastic, so there is no paint to flake or chip, and a backside bolt tightens it to the column to stop it sliding. Stands 9″ tall to fit 3″×3″ posts in safety yellow.

Select variant
PALLET RACK PROTECTION

Technical Specifications

Material
HDPE / high-density polyethylene
Mount
Snap-on · backside bolt to secure
Height
9″
Fits
3″×3″ upright posts
Finish
Molded-in safety yellow (no paint to chip)
Pallet Rack Protection

Related products

Full catalog →

A column protection guard with a patented hybrid design of rubber elastomers and steel, combining the impact absorption of rubber with the durability of steel. The manufacturer's own frontal-impact data claims the elastic compound and U-shaped steel insert cut peak column stress by as much as 72%, and the 12″-tall guard installs with no hardware over the footplate to protect both front and side impacts.

  • Size: 12″ tall × 5-1/2″ wide (5″ tall version available)
  • Design: Hybrid rubber elastomer + U-shaped steel insert
  • Performance: Up to 72% lower peak column stress in frontal impact (manufacturer-stated)
  • Fits: Roll-formed or structural columns, 3″ wide and up to 3″ deep

The manufacturer's most popular post protector for reach-truck applications, shielding rack uprights from forklift impacts. The 4″-high V-nose is built from 5/16″-thick steel to absorb outrigger impact and mounts above the footplate with a 3/4″-diameter floor anchor.

  • Height: 4″ high (fits under low beam levels)
  • Construction: 5/16″-thick steel
  • Fits: 3″-wide rack columns (others available)
  • Mounting: 3/4″-dia. floor anchor (sold separately)
Priced on your quoteView Specs ›

A floor-mounted pallet rack column guard that protects the bottom portion of the frame where most outrigger and forklift damage occurs. Built from 3/16″-thick steel and available in 12″, 18″ or 24″ heights to suit different exposure levels.

  • Mount: Floor-mounted
  • Construction: 3/16″-thick steel
  • Footplate: 6″ × 7-3/4″ with (4) 5/8″-dia. anchor holes
  • Heights: 12″ · 18″ · 24″
NOT SURE WHAT FITS?

Let our engineers spec it.

Send a rack drawing or a photo. We'll return a per-bay layout with quantities, install notes, and a detailed quote.

Related reading

All articles →