Industrial Safety Fence

Bolt-together welded wire storage cages that lock up tools, inventory and tenant belongings inside an open warehouse. Each locker is built from 10-gauge, 2″ × 2″ welded wire mesh panels framed in 1-1/4″ steel angle, so light and air pass through while contents stay secured and visible. Single- or double-tier units bolt together on site as wall panels plus a hinged door, with welded wire ceiling panels to close the top.

• Mesh: 10-gauge wire · 2″ × 2″ welded square mesh
• Framework: 1-1/4″ roll-formed steel angle
• Panel sizes: 7′-6″ high · 3′ or 4′ wide · 3′, 4′ or 5′ deep
• Door: Hinged wire door with padlock hasp; single or double tier

A full-height, lockable wire enclosure that isolates high-value and controlled goods inside a larger facility. Floor-to-ceiling panels of 10-gauge, 2″ × 1″ woven mesh bolt to 2″ square steel posts to build a four-wall cage, and a hinged or sliding wire door with a padlock hasp controls the single point of access. Panels stack to 8′ or 10′ openings and the cage bolts to the floor for a permanent, see-through secure room.

• Mesh: 10-ga wire · 2″ × 1″ woven mesh (3/4″ high-security avail.)
• Framework: 1-1/4″ steel angle welded to the mesh
• Posts: 2″ square, 14-ga steel tube, bolted
• Construction shown: Our primary supplier's; the alternate supplier's panels use 2.5″ 16-ga posts and 8-ga mesh

Floor-to-ceiling wire partition walls that divide open warehouse space into secured rooms, tool cribs, and controlled-access areas such as DEA and pharmacy cages. Panels of 10-gauge, 2″ × 1″ woven mesh weld into 1-1/4″ steel angle and bolt to 2″ square, 14-gauge posts, building any run or corner in one-foot increments. Panels ship 4′ and 5′ high and stack to 8′ or 10′ walls, with matching hinged and sliding doors.

• Mesh: 10-gauge wire · 2″ × 1″ woven mesh
• Framework: 1-1/4″ hot-rolled steel angle
• Posts: 2″ square, 14-ga steel tube; bolt-together
• Construction shown: Our primary supplier's; the alternate supplier's panels use 2.5″ 16-ga posts and 8-ga mesh