Mezzanine Pivot Gate

A self-closing pallet gate built from six independent spring-loaded arms on integrated casters, so a strike damages one arm rather than the whole gate — and that arm is replaced individually. The arms close behind the load automatically, keeping a barrier at the edge whether the pallet is in place or not. Widths of 4, 6 and 8 ft at 42″ high, with clearances of 48″, 72″ and 96″ for roll-formed and structural rack.

• Height: 42″
• Widths: 4 ft · 6 ft · 8 ft
• Clearances: 48″ · 72″ · 96″
• Arms: 6 independent spring-loaded arms, individually replaceable

A pallet-drop gate that keeps the edge guarded while it is loaded: raise one side and the other comes down, so there is always a rail between the platform and the drop. The frame is cut to width on site, from 10 ft down to 3 ft, which suits openings that aren’t a standard size. It takes pallets up to 6′-1″ high and 7′-1″ deep.

• Action: One side closes as the other opens
• Interior width: Cut to fit on site, 109-1/8″ down to 25-1/8″ (outside 120″ to 36″)
• Pallet clearance: 7′-1″ deep × 6′-1″ max pallet height
• Footprint: Outside width 120″ to 36″ × 84-1/2″ D × 85-7/16″ H

A pallet gate that rotates up into a vertical cradle, for openings with little floor space either side, and you need overhead room equal to the gate width. It stays hinged to its centre post throughout, so it cannot be dropped over the edge. Closed, it gives a 42″ rail with toe board.

• Openings: 4 ft to 8 ft (custom sizes available)
• Vertical clearance: Equal to the gate width
• Height: 42″ rail with toe board
• Construction: 1-1/2″ dia. steel tube; 3″ × 3″ posts on 6″ × 6″ base plates