Polymer Safety Bollards
A polymer bollard that flexes on impact and returns to shape, rather than resisting rigidly like a steel pipe. Because the material absorbs and dissipates the energy, far less of it is transferred into the slab and the anchors, which is what usually turns a hard strike on a steel bollard into concrete repair as well as bollard replacement. Rated to PAS 13, the traffic-management barrier standard, by impact energy rather than a lb-at-mph figure. Yellow and grey as standard, on an electrophoretic-coated base.
Set the quantity on each size you need in the table below and add it to your cart. When you're done, request a quote for everything at once, no pricing until we confirm your specs.
Technical Specifications
Available Sizes & Parts
Order by height against the traffic you are protecting from — the published impact zone runs to 47-1/4″, so the taller bollard is about visibility and coverage rather than a higher rating. Rated to PAS 13 by energy absorbed (5,800 J), which is not directly comparable to the lb-at-mph figures quoted on the steel products.
| Height | Price | Qty | |
|---|---|---|---|
| 32.875″ | Quote | ||
| 47.25″ | Quote | ||
| 78.75″ | Quote |
Sizes shown are industry-standard. Exact part numbers and pricing are confirmed with your engineered quote.
Related products
Sturdy, safety-yellow steel posts that absorb and deflect impacts from forklifts and other machinery to protect dock doors, rack ends, electrical panels and pedestrian areas. Designed for easy floor anchoring without concrete work and suitable for indoor or outdoor use.
- Size: 42″ tall, 4.5″-dia. pipe, 0.125″ wall
- Footplate: 10″ × 10″ × 1/2″-thick with four anchor holes (3/4″ or 1/2″ anchors)
- Finish: Powder-coated safety yellow
- Top cap: Black plastic cap included
An 84″ bollard set into the slab rather than bolted to it, so the concrete itself resists the impact instead of four anchors in shear. That makes it the choice for exterior dock approaches, gate posts and yard traffic where a surface-mounted baseplate would shear off under a hard strike. Available in 5.5″, 6.5″ and 8.5″ outside diameters, in safety yellow or red, with a plastic cap and striped decal.
- Length: 84″ overall (buried depth per site conditions)
- Diameters: 5.5″ · 6.5″ · 8.5″ OD
- Install: Direct bury into slab — no baseplate or anchors
- Colours: Safety yellow or red
High-density polyethylene sleeves that drop over an existing bollard to restore high-visibility colour without repainting, and to stop rust bleeding onto the slab. Because they are plastic they do not chip or need masking off, which is why they are common in food and retail-facing areas where a repaint means downtime. Internal diameters of 4.5″, 7″, 8-7/8″ and 10-7/8″ cover the usual bollard sizes, in heights from 52″ to 72″.
- Material: Heavy-duty high-density polyethylene (HDPE)
- Internal diameters: 4.5″ · 7″ · 8-7/8″ · 10-7/8″
- Heights: 52″ · 60″ · 64″ · 72″
- Install: Slides over existing bollard, no tools
Let our engineers spec it.
Send a rack drawing or a photo. We'll return a per-bay layout with quantities, install notes, and a detailed quote.