Rack Safety Products
Talk to a specialist(951) 395-0280
NEW
Click to enlarge
Pallet Rack Protection

Space-Saving End of Aisle Rack Protector

An end-of-aisle guard with a notched profile that nests in close to the rack frame, so it protects the row end without taking the floor space a conventional end guard needs. At 12″ high it stays below the first beam and does not block the first pallet position. Heavy-duty 3/8″ steel, installed around the rack legs at the end of the aisle.

Select variant
PALLET RACK PROTECTION

Technical Specifications

Construction
Heavy-duty 3/8″ steel
Profile
Notched to nest close to the frame
Height
12″ low profile; does not block the first pallet bay
Install
Around the rack legs at the end of the aisle
Pallet Rack Protection

Related products

Full catalog →

A heavy end-of-aisle rack protector for severe environments and high-traffic intersecting aisles, protecting the entire depth of the upright where most damage occurs. Built with 5/16″-thick construction on a pre-punched angle base and available in right, left or double-end designs.

  • Height: 12″ tall
  • Construction: 5/16″-thick steel
  • Base: 5″ × 3″ × 7/16″-thick steel angle, pre-punched
  • Mounting: 3/4″-dia. anchors (sold separately)

A 5 mm steel guard that wraps the exposed corner of an end-of-row upright, doorway or wall corner to take the brunt of forklift strikes. Floor-mounted on an 8″ × 8″ base plate with three 1/2″ wedge anchors, it leaves a 6″ × 6″ clearance around the column. Available in 12″, 18″, 24″ and 42″ heights, powder-coated safety yellow.

  • Mount: Floor-mounted · (3) 1/2″-dia. wedge anchors
  • Construction: 5 mm (1/5″) thick steel
  • Heights: 12″ · 18″ · 24″ · 42″
  • Base plate: 8″ × 8″ (6″ × 6″ inside clearance)

A floor-mounted guard that runs the depth of the end frame and curves outward into the aisle, taking the hit before a truck reaches the upright. Standard duty is an 8″ upright on 5″ × 3″ angle in 1/4″ steel; heavy duty steps up to a 12″ upright on 6″ × 4″ angle in 1/2″ steel for intersecting aisles and high-traffic ends. Ordered left, right or double-sided in 42″ and 48″ lengths.

  • Lengths: 42″ · 48″
  • Configurations: Left · Right · Double
  • Standard duty: 8″ upright · 5″ × 3″ angle · 1/4″ steel
  • Heavy duty: 12″ upright · 6″ × 4″ angle · 1/2″ steel
NOT SURE WHAT FITS?

Let our engineers spec it.

Send a rack drawing or a photo. We'll return a per-bay layout with quantities, install notes, and a detailed quote.

Related reading

All articles →