Wrap Around Rack-Pal
A row-end protector with a 12″-high, 3/8″ steel crescent welded to an L5″ × 3″ × 1/4″ structural floor angle, wrapping the end frame from the aisle side. Single-sided suits a row end against a wall or flue; double-sided is used where aisles intersect and impact can come from either direction. Note that right- and left-hand crescents must be ordered as pairs.
Set the quantity on each size you need in the table below and add it to your cart. When you're done, request a quote for everything at once, no pricing until we confirm your specs.
Technical Specifications
Available Sizes & Parts
Length is the floor angle. Double-sided has a crescent welded on each side of the angle.
| Type | Length | Price | Qty | |
|---|---|---|---|---|
| Single-sided | 24″ | Quote | ||
| Single-sided | 42″ | Quote | ||
| Single-sided | 48″ | Quote | ||
| Single-sided | 54″ | Quote | ||
| Double-sided | 42″ | Quote | ||
| Double-sided | 48″ | Quote |
Sizes shown are industry-standard. Exact part numbers and pricing are confirmed with your engineered quote.
Related products
A heavy end-of-aisle rack protector for severe environments and high-traffic intersecting aisles, protecting the entire depth of the upright where most damage occurs. Built with 5/16″-thick construction on a pre-punched angle base and available in right, left or double-end designs.
- Height: 12″ tall
- Construction: 5/16″-thick steel
- Base: 5″ × 3″ × 7/16″-thick steel angle, pre-punched
- Mounting: 3/4″-dia. anchors (sold separately)
A 5 mm steel guard that wraps the exposed corner of an end-of-row upright, doorway or wall corner to take the brunt of forklift strikes. Floor-mounted on an 8″ × 8″ base plate with three 1/2″ wedge anchors, it leaves a 6″ × 6″ clearance around the column. Available in 12″, 18″, 24″ and 42″ heights, powder-coated safety yellow.
- Mount: Floor-mounted · (3) 1/2″-dia. wedge anchors
- Construction: 5 mm (1/5″) thick steel
- Heights: 12″ · 18″ · 24″ · 42″
- Base plate: 8″ × 8″ (6″ × 6″ inside clearance)
A floor-mounted guard that runs the depth of the end frame and curves outward into the aisle, taking the hit before a truck reaches the upright. Standard duty is an 8″ upright on 5″ × 3″ angle in 1/4″ steel; heavy duty steps up to a 12″ upright on 6″ × 4″ angle in 1/2″ steel for intersecting aisles and high-traffic ends. Ordered left, right or double-sided in 42″ and 48″ lengths.
- Lengths: 42″ · 48″
- Configurations: Left · Right · Double
- Standard duty: 8″ upright · 5″ × 3″ angle · 1/4″ steel
- Heavy duty: 12″ upright · 6″ × 4″ angle · 1/2″ steel
Let our engineers spec it.
Send a rack drawing or a photo. We'll return a per-bay layout with quantities, install notes, and a detailed quote.