Rack Safety Products
Talk to a specialist(951) 395-0280
NEW
Click to enlarge
Dock & Door Safety

Dock Stop Lite

Two steel arms on 42″ bollards that swing in to meet across an open dock door, then lock in place with slide bars and a pin, and swing back out of the way when a trailer is in. It is the lighter partner to the Super Heavy Duty Dock Stop, rated by the manufacturer at 4,000 lbs at 4 mph: a hard, visible stop for pallet trucks and people at docks that do not need the 30,000 lb version. Sold as a pair, bollards included, for 8 ft and 9–12 ft openings.

Select variant
DOCK & DOOR SAFETY

Technical Specifications

Impact rating
4,000 lbs at 4 mph (manufacturer-stated)
Arms
Two rotating steel arms that meet in the centre
Bollards
Two 42″ bollards included (30″ optional), 10″ × 10″ × 1/2″ base plates
Lock
Slide bars with locking pin
Openings
8 ft · 9–12 ft
Finish
Powder-coated safety yellow
Dock & Door Safety

Related products

Full catalog →

An all-welded steel gate that pivots across the dock opening when no trailer is docked, standing 42″ high so it reads as a barrier rather than a trip rail. It mounts over a 6″ × 42″ bollard, which means the bollard takes any impact instead of the gate hinge. Supplied in 5 ft to 14 ft widths in 1 ft increments, single or paired for wide openings.

  • Height: 42″ (OSHA guardrail height)
  • Widths: 5 ft to 14 ft in 1 ft increments
  • Construction: All-welded steel
  • Mounting: Over a 6″ × 42″ bollard

The heaviest barrier in the dock range, rated by the manufacturer at 30,000 lbs at 4 mph — an order of magnitude above interior guardrail, because a loaded truck reversing at a dock edge carries far more energy than an aisle strike. Built on 5″ steel posts with 12″ × 12″ × 5/8″ offset base plates and 1″ pins, with a sliding locking plate and no pinch points. Clearances of 8, 10 and 12 ft.

  • Impact rating: 30,000 lbs at 4 mph (manufacturer-stated)
  • Height: 42″
  • Posts: 5″ steel on 12″ × 12″ × 5/8″ offset base plates
  • Clearances: 8 ft · 10 ft · 12 ft

A vertical-lift barrier that rises straight up rather than swinging, for openings where there is no floor space for a gate arc. Air assist takes the weight so it can be raised one-handed, and aluminium rails keep the moving section light while the carbon steel posts carry the load. The 42″ top rail meets OSHA guardrail height when lowered. For 8, 9, 10 and 12 ft clear openings.

  • Action: Vertical lift, air-assisted
  • Posts: Carbon steel, 4.5″ × 2″
  • Rails: Aluminium, 1.5″
  • Top rail: 42″ (OSHA guardrail height)
NOT SURE WHAT FITS?

Let our engineers spec it.

Send a rack drawing or a photo. We'll return a per-bay layout with quantities, install notes, and a detailed quote.

Related reading

All articles →